Today, due to the wide range of uses of asbestos and its heat resistance properties, they have become a vital building component. However, they also damage the health of the employees.
Hence, to ensure safety while using them, here are the asbestos removal London processes.
Step 1: Identification and Assessment
The identification of asbestos-containing materials in a building is a point of starting for the removal of asbestos. A survey by certified professionals usually brings about its implementation. When suspected, samples are taken and sent to a laboratory for verification. From there, an assessment is performed to establish the level of removal required.
Step 2: Planning and Legal Compliance
Once identified, experts design a removal plan. This ASBESTOS REMOVAL SERVICES LONDON process involves compliance with the rules and regulations of the locality, state, and federal. Everything included in the asbestos removal revolves around it.
Step 3: Preparing the Site
Precautions such as anti-air pressure systems and plastic sheetings are done to isolate the site to prevent fibre contamination, which is a vital step. Expert professionals must also handle these delicate situations.
Also Read: Understanding the Need for Asbestos Surveys
Step 4: Personal Protective Equipment
Always ensure to wear the protective gear provided by the company while working in the ASBESTOS REMOVAL SERVICES LONDON processes. This will not only ensure your safety but also allow you to work for a long time.
Step 5: Wetting the Asbestos
The asbestos should be kept wet to prevent this release of fibres; otherwise, there would be a chance of airborne fibres. A surfactant may be included in the water to aid the penetration of the materials.
Step 6: Clean up and Decontamination
Ensure that the surroundings are free of asbestos fibres after your work. HEPA vacuums and wet wiping are used to remove any fibres left behind. The area is inspected visually as well as through air monitoring to ensure that the area is safe.
Step 7: Air Monitoring
Throughout and after removal, air monitoring is conducted. It is done to check that the airborne concentration of asbestos fibres is at permissible exposure limits.
Step 8: Asbestos Waste Disposal
You are required to dispose of the protective gear worn during working hours at the end of the day or when asked. They are usually disposed of in a licensed hazardous landfill.
Step 9: Final Inspection and Clearance
An independent party makes a final inspection. Air samples are taken to ensure that the air is safe to occupy and reoccupy the area. When cleared, the containment measures are removed.
Concluding Remarks
Removing asbestos is a very involved process, yet much emphasis is laid on health and safety. It is well-planned, carried out, and strictly regulated. Although asbestos seems to be very costly and time-consuming, its handling should not be undervalued. The asbestos removal in London process ensures everyone’s safety.